top of page
Outbound_Yachts_Final.gif

Going the distance ... 

NEW OUTBOUND 521

Classic ocean cruising design

The NEW Outbound 521 sports clean lines, moderate displacement, low freeboard, a low, safe cockpit, a three-step companionway, and push button sailing - not to mention the sweetest helm you’ll find on any yacht, cruising or racing.

Critical to our design was a yacht that can be handled by a cruising couple with ease. To Outbound this means moderate displacement, a low cockpit, and a short companionway. The result is a comfortable, easy to handle, and safe offshore passagemaker. The cockpit is deep with the sole approximately 16 inches closer to the waterline than other center cockpit designs. The short companionway makes the cockpit an extension of the interior with easy and safe access. The salon is “semi-raised” offering a bright and airy interior.

The semi-raised salon also provides space for tanks under the salon sole, in the centre of the boat, putting weight where it should be and opening up stowage under settees and bunks. Four 225 amp AGM batteries are also centrally located over the low CG bulb keel.

Safety & Performance

At Outbound Yachts we tackle safety from a performance and ergonomic point of view. Yachts deigned to sail fast, not to mention avoid adverse weather. The 521 is optimized to fight fatigue with simple systems and excellent ergonomics, making her simply safer for the cruising couple. Add quality construction with the finest materials and a beautiful hand-crafted interior, the result is a fun, safe, and comfortable yacht that will be the envy of any anchorage

Built for Cruising Couples 

Critical to our design refinement was a yacht that can be handled by a cruising couple with ease. This means a moderate displacement hull, a low cockpit, and a short companionway. The result is a comfortable, easy to handle, and safe offshore passagemaker. The cockpit is deep with the sole approximately 16 inches closer to the waterline than other center cockpit designs. The short companionway makes the cockpit an extension of the interior with easy and safe access. The salon is “semi-raised” offering a bright and airy interior.

Sensible Spaces 

The semi-raised salon provides additional space for tanks under the salon sole. This keeps the weight in the center of the boat where it should be and opens up stowage under settees and bunks. The heavy batteries are also centrally located over the low CG bulb keel. Adding to our fatigue fighting philosophy, great emphasis is placed on system simplicity and access. A work bench ensures that the generous galley counters are reserved for cooking.

52Arrangement2019.jpg

INTERIOR LAYOUT

DIMENSIONS

L.O.A. :  52'0''  (15.85 m)
D.W.L. : 47'10''  (14.32 m)
Beam : 15'4''  (4.57 m)
Draft :  7'6''  (2.13 m)
Displacement :  42,000 lbs  (19,050 kg)
Ballast :  16,500 lbs  (7,484 kg )
Water : 200 US gallons (757 litres)
Fuel : 250 US gallons  (946litres)
Sail Area : 1200 sq ft  (111 sq m )
Engine : 110 hp 80.9 kW
Mast above water :  68'   (20.73 m )
Designer : Tim Kernan

STANDARD SPECIFICATION

USA Specification - can also be built to EU certification with CE certification and RCD conformity.

Hull & Deck

  • 100% hand-laid solid fiberglass hull lamination

  • Vinylester resin in outer layers for superior blister resistance

  • Bi-axial fiberglass cloth throughout lamination for added impact resistance

  • Additional hull reinforcement in bottom, turn of bilge, and bow sections

  • Hydrex Max Guard brand ISO-NPG gelcoat for long lasting shine and durability

  • Boot and Cove stripes painted with fade resistant linear polyurethane paint

  • Heavy duty longitudinal/floor/mast step/engine bed system

  • All bulkheads, floors (athwartship stringers), and longitudinals bonded securely to hull while in the mold

  • All furniture bonded direct to hull and deck where appropriate for added strength

  • No-liner interior construction provides direct access to entire hull

  • Divinycell cored deck lamination

  • Molded nonskid in contrasting color (teak deck option)

  • Deck fastened and sealed with 3M 5200 polyurethane adhesive/sealant and through-bolted on 4 inch centers to an inward molded flange integral to hull lamination

  • Bulkheads securely bonded on their entire perimeter, hull and deck

  • Lead keel with bulb for maximum righting moment

  • Watertight bulkheads fore and aft segregating interior living spaces

  • Balanced spade rudder with stainless steel rudder post

 

Deck Features

  • Hard Dodger with 0.5in laminated safety glass

  • Lewmar deck hatches

  • Manship polished stainless steel opening ports

  • Four stainless steel dorade vent guards and cowls mounted on molded deck boxes

  • Lexan sliding hatch on Teflon slides

  • Hinged Companionway doors

  • Lexan drop boards

  • Molded 2” foredeck bulwark topped by 2.5” toerail for offshore safety

  • 30 inch high 1.25” diameter lifeline stanchions with 316 stainless steel 1×19 double lifelines

  • Upper and lower 1×19 stainless steel lifelines

  • 6 Pelican hook boarding gates: port, starboard, and aft

  • 25” diameter stainless steel stern pulpit with aft gate

  • 2 Large aft deck lazarettes with Bailey hatch dogs

  • Large bow sail/deck gear locker with watertight bulkhead and easy access to anchor rode

  • 4 safety harnesses padeyes installed in cockpit

  • USCG approved stowage locker for 2 20# aluminum propane tanks (1 tank provided)

  • Stainless steel grab rails within continuous reach along cabin top.

  • Stainless steel swim/man overboard boarding ladder.

  • Six 12 inch stainless steel mooring cleats

  • Aquasignal Navigation lights

Ground Tackle

  • Divided self draining chain locker easily accessible from forward stowage locker

  • Custom stainless double anchor roller

  • Molded scupper aft of bow roller to catch water brought aboard with anchor chain

  • Maxwell Windlass with capstan with handheld remote control

  • Helm mounted windlass control and counter

  • 200 feet Hi test anchor chain

  • Delta anchor (or credit for buyers selection)

  • Stern anchor and 200’ 3-strand rode, 40 feet chain

  • 6 12” stainless steel mooring cleats

Sailing Hardware

  • Keel stepped Selden double spreader mast with 316 stainless steel 1X19 standing rigging

  • Main, Genoa, Staysail, Spinnaker (2), staysail halyards, topping lift

  • Boom Vang

  • Furlex Genoa Furler

  • Furlex Staysail Furler

  • 2 Lewmar 65CST Primaries (Electric Option)

  • 2 Lewmar 50 CST Secondary

  • 1 Lewmar 48 ECST Electric main halard winch

  • 2 mast mounted Lewmar self tailing winches

Sails

  • Hood Vertical Batten Vectran main

  • Hood Cross Cut Vectran Genoa

  • Hood Cross Cut Vetran Jib

Propulsion

  • Yanmar 4JH110 with KM4A with reduction gear, freshwater cooled diesel

  • Yanmar engine control panel and alarms located adjacent to helm (tachometer, hour meter, engine temperature and oil pressure gauges, warning lights and alarms)

  • Waterlift muffler

  • Dual Racor fuel filter

  • Bronze seawater strainer

  • Lewmar single lever shift and throttle control mounted on pedestal

  • Stainless propeller shaft

  • Hinged companionway and two lift off side panels provide full access to engine

  • Soundown fireproof 2#/square foot engine compartment sound insulation

  • 250 gallons(est) of fuel capacity in two tanks (additional capacity options)

  • Fuel tanks vent to midship stanchions – well above waterline when heeled

  • Fuel supply, fuel return, water manifolds, and battery switches located in dedicated locker for easy operation and monitoring

Electrical

  • ABYC approved corrosion resistant tinned copper wire

  • 50 Amp Shore power system

  • Inverter/charger

  • Marinco 110 volt / 50 amp shore power cord and deck fitting.

  • 50’ Marinco 50 Amp shore power cord

  • 110 volt electrical outlets throughout vessel

  • Separate on/off switches for house and engine batteries

  • Cross-connect switch allows house bank to be used to start engine if required

  • House battery bank system includes four 8D (200 amp hours each) deep cycle batteries

  • Machinery Battery bank, separate from house for engine, windlass, and bow thruster

  • Custom backlit electrical panels with full displays by Common Ground of Newport Beach

  • Electrical panel hinged for easy access

  • 12V utility plugs throughout vessel

  • ABYC approved bonding system

  • 100 square feet of copper ground strap glassed to hull at waterline for SSB ground plane

  • PVC conduits provided for future wiring installations

  • Wiring led clear of bilge where possible

  • Galvanic Isolator

Lighting

  • Aquasignal Series 32 LED Bow, Stern, Anchor lights

  • Aquasignal Steaming and Deck light combo

  • Imtra LED white/red dome style interior lighting

  • Courtesy/safety lighting throughout the cabin sole

  • Individual LED reading lamps in each cabin

  • Task lighting in engine compartment, lazarette, and forward sail/chain locker

  • Automatic locker lights in hanging and pantry lockers

Plumbing

  • 225 gallon(est) fresh water capacity (additional capacity options)

  • 16 gallon Isotherm stainless steel hot water heater

  • Par 12 volt fresh water pump(2)

  • Shurflow saltwater deck/anchor wash down pumps, one forward, one aft

  • Rule 2000 electric bilge pumps (2) with float switch

  • Rule 3700 GHP electric bilge pump with float switch

  • Helm mounted Whale Gusher 10 manual bilge pump

  • Cabin mounted Whale Gusher 10 manual bilge pump

  • Bronze flush mounted through hulls with sea cocks, labeled for easy identification

  • Transom mounted hot and cold fresh water shower

  • Fiberglass holding tanks in each head (approximately 30 Gallons each), gravity feed overboard discharge

  • Tank Watch holding tank indicators

  • Sea Land Odor resistant hose used for all head plumbing

  • Raritan PHII manual heads

Interior

Outbound Yachts offers its owners a unique opportunity to customize their interiors to a level that very few builders allow.

  • Teak Interior

  • Satin interior varnish

  • Varnished Teak and Holly cabin sole

  • Generous handholds throughout interior

  • Positive locking floorboards

  • Positive locking locker buttons

  • Cedar Lined Hanging lockers

  • Automatic hanging locker lights

  • Louvered doors and cabinet doors for ventilation

  • Mobella door handles

  • 4 dorades with internal closures and deck plates

  • Prewired for stereo and 6 speakers

  • Padded vinyl removable overhead panels

  • Seamless Head compartments from cabin sole to counter for easy cleaning

  • Cantalupi interior lighting with bulkhead switches

  • Courtesy/safety lighting throughout the cabin sole

  • Individual reading lamps in each cabin

  • Task lighting in engine compartment, lazarette, and forward sail/chain locker

  • Automatic locker lights in hanging and pantry lockers

Galley

  • Corian counters with 2” fiddles

  • Three burner Force 10 propane stove with thermostatically controlled oven

  • Polished stainless stove crash bar with welded eyes for cook’s safety belt

  • Scanvik polished stainless steel double sink

  • Scanvik faucet assembly

  • Jabsco salt water foot pump

  • Jabsco fresh water foot pump

  • Icebox top and front opening

  • Segregated freezer

  • Drawers, trash bin, microwave cabinet, and louvered lockers

  • Remote propane shutoff switch

Navigation Station

  • Forward facing chart table

  • Inset storage tray outboard of chart table for books, hand bearing compass, binoculars, etc

  • Drawer unit including file drawer for ships papers

  • Instrument box located forward and above chart table surface

  • Hinged custom electrical panel for ease of access

  • Link Battery monitor

  • Aquasignal chart lights: 1 red, 1 white

bottom of page