Key Features

• Solid 100% hand-laid fiberglass hull: still the preferred choice of serious cruisers

• Lines by renowned racing yacht designer: weather beating performance and superior handling

• Moderate displacement: dampened motion and offshore comfort

• High Righting Moment: upwind performance

• Large tanks centered over the keel: 200 gallons water, 190 gallons fuel

• Long bulb keel molded with the hull: no keel bolts, deep bilge sump

• Semi-raised salon: airy, family room style interior

• Large, deep, and narrow cockpit: comfort and offshore safety

• Short companionway: safe movement to and from the cabin

• Watertight bulkhead 7 feet from bow: collision safety

• Double Headstay Rig: BOC inspired for safety, performance, and versatility

• Large Foredeck sail/stowage locker: keep wet gear away from living spaces

• Dedicated liferaft locker: easy deployment, out of the way, off the deck

• Large stowage capacity: All gear stowed safely in its place

• Ventilation: 4 large dorades, solar vent, 10 opening ports, 8 deck hatches

STANDARD SPECIFICATION

USA Specification - can also be built to EU certification with CE certification and RCD conformity.

Hull & Deck

• 100% hand-laid solid fiberglass hull lamination (schedule designed by Carl Schumacher, NA)

• Vinylester resin in outer layers for superior blister resistance

• Knitted bi-axial fiberglass cloth throughout lamination for added impact resistance

• Additional hull reinforcement in bottom, turn of bilge, and bow sections

• Ashland Max Guard brand ISO-NPG gelcoat for long lasting shine and durability

• Boot and Cove stripes painted with fade resistant linear polyurethane paint

• Heavy duty longitudinal/floor/mast step/engine bed system

• All bulkheads, floors (athwartship stringers), and longitudinals bonded securely to hull while in the mold

• All furniture bonded direct to hull and deck where appropriate for added strength

• No-liner interior construction provides direct access to entire hull

• Divinycell cored vacuum bagged deck lamination

• Molded pyramid nonskid in Max Guard contrasting color.. “Moon Dust”

• Deck fastened and sealed with 3M 5200 polyurethane adhesive/sealant and through-bolted on 4 inch centers to 3” inward molded flange integral to hull lamination

• Antal aluminum toe rail through-bolted to hull deck joint (teak toerail option)

• Bulkheads securely bonded on their entire perimeter, hull and deck

• Hull and keel molded as a single lamination to eliminate keel bolts and to provide 18 inch deep bilge sump

• 6500 pound lead ballast inside molded keel shell laminated with the hull itself

• 3500 pound lead bulb for maximum righting moment

• Watertight bulkhead 7 feet from bow

• Upper, lower, and intermediate shroud stainless steel chain plates through-bolted direct to main bulkhead, inboard for upwind sheeting angles

• One coat bottom paint.

• Balanced spade rudder with 4 inch diameter stainless steel rudder post

Deck Features

• Minimal exterior teak for easy maintenance – (teak toe rail option)

• T shaped cockpit with long seats for sleeping and lounging outside

• Diamond nonskid on cockpit seats to reduce clothing chafe

• 32 inch high helmsman “Bishop Seat” for comfortable offshore driving

• Molded 3 inch foredeck bulwark topped by 2.5 inch toerail for offshore safety

• Primary winches located in easy reach of helmsman

• 32 inch wide transom opening for easy access to transom swim/boarding platform and to provide instant cockpit drainage

• 30” high 1.25” diameter lifeline stanchions with 316 stainless steel 1×19 double lifelines

• Upper (¼”) and lower (3/16”) 1×19 stainless steel lifelines

• 6 Pelican hook boarding gates: port, starboard, and aft

• 25” diameter stainless steel stern pulpit surrounds entire cockpit

• Large cockpit lazarette for easy access stowage and to provide ventilation and light for servicing auxiliary equipment installed under the cockpit

• Liferaft stowage box (30”x16”x12”) under helm seat for easy deployment

• 4 Wichard folding safety harnesses padeyes installed in cockpit

• USCG approved stowage locker for 2 20# aluminum propane tanks (1 tank provided)

• Recessed engine control in seat back adjacent to pedestal controls, acrylic cover.

• Stainless steel grab rails within continuous reach along cabin top.

• Four stainless steel dorade vent guards and cowls mounted on molded deck boxes.

• Molded sea hood with integral instrument box in easy view of entire cockpit

• Large dodger breakwater for easy dodger design and installation, molded pass through for lines led to cockpit

• Seven Lewmar tinted acrylic Ocean hatches (2 size 60, 6 size 10)

• Stainless steel swim/man overboard boarding ladder.

• Six 12 inch stainless steel mooring cleats mounted on stainless rub plates

• Large bow sail/deck gear locker with watertight bulkhead and easy access to anchor rode.

• Work bench, 6 drawers, cabinet in lazarette

• Fiberglass drop boards for stern opening

​

Ground Tackle

• Divided self draining chain locker easily accessible from forward stowage locker

• Custom stainless double anchor roller

• Molded scupper aft of bow roller to catch water brought aboard with anchor chain

• Lewmar V4 Windlass with capstan

• Lewmar handheld windless remote control

• 200 feet 5/16 Hi test anchor chain

• Rocna 33 anchor (or credit for buyers selection)

• Fortress FX-37 stern anchor and 200’ 3-strand rode, 40 feet chain

• 6 12” stainless steel mooring cleats

• Four Taylor fenders

• 4 35’ golden braid pre-spliced dock lines

​

Steering

• Lewmar Cobra Enguard pedestal direct drive steering with friction brake

• 44” diameter Destroyer stainless wheel with leather cover

• 5” Ritchie Globemaster SP-5C Pedestal mounted steering compass

• Stainless steel emergency tiller

​

Sailing Hardware

• Keel stepped Sparcraft double spreader mast with 316 stainless steel 1X19 continuous standing rigging

• Internal mast wiring conduits

• 2 mast mounted Lewmar 40 self tailing winches

• Split backstay for easy access to transom

• Antal full batten mainsail track

• T900 Spectra low stretch Main and Genoa halyards

• Low stretch Staysail halyard

• 2 low stretch spinnaker halyards

• Main and staysail halyards led to cockpit – Lewmar rope clutch

• Mainsheet led to cabin top – Lewmar rope clutch

• Two main reef lines led to cockpit – Lewmar rope clutch

• Lazy Jacks – low stretch/chafe spectra

• Spinnaker pole mast track and topping lift (spinnaker pole and car optional)

• Removable staysail stay with Wichard Ratchet Pelican Hook

• Genoa roller furler (Harken standard or credit)

• 4 Schaefer “Clear Step” furling lead blocks

• Genoa furling line led to stopper near helm

• Lewmar self tailing winches:

• 2 Primaries   #68 STC, two speed self tailing chrome

• 2 Mainsheet/halyard/reef on house   #48 STC, two speed self tailing chrome

• 2 on mast   #40 STC, two speed self tailing chrome

• Lewmar Ocean 3 mainsheet traveler with 4:1 control lines and Harken cam cleats

• 13 feet Lewmar Ocean 3 Genoa Track (port & starboard)

• 2 Lewmar Ocean 3 Genoa lead blocks with plunger pins

• 2 Lewmar end stop sheet leads

• 2 Lewmar Ocean deck organizers – 4 sheaves

• Genoa sheets, staysail sheets, main sheet

• Sparcraft boom vang with control line led to cockpit – Lewmar rope clutch

• Windex 15 spar fly on masthead

• 2 Lewmar 10 inch lock in Power Grip winch handles

• 2 Winch handle pockets

​

Miscellaneous Deck / Safety gear

• 3 USCG approved 10A-BC fire extinguishers

• 1 USCG approved flare kit

• 6 USCG approved life jackets

• 1 USCG approved throwable life cushion

• Sunbrella mainsail cover

​

Sails

• Hood Dacron full batten Main (Vectran Upgrade)

• Hood Dacron 140 % Genoa (Vectran Upgrade)

• Hood Dacron 75% Solant Jib (Vectran Upgrade)

​

Propulsion

• Yanmar 4JH80 80 HP freshwater cooled diesel

• Yanmar C-Type engine control panel and alarms located adjacent to helm

• Waterlift muffler with 3” diameter exhaust hose

• Racor 500FG fuel filter

• Bronze seawater strainer

• Lewmar single lever shift and throttle control mounted on pedestal

• Morse engine control cables

• 5 inch stainless steel propeller shaft

• 3 blade bronze 21 X 13 propeller

• Hinged companionway and two lift off side panels provide full access to engine

• Engine compartment sound insulation

• Engine compartment utility light

• 190 gallons of fuel capacity in four FRP tanks located under the cabin sole over the keel

• Fuel tanks vent to midship stanchions – well above waterline when heeled

• Fuel supply, fuel return, water manifolds, and battery switches located in dedicated locker for easy operation and monitoring

Electrical

• Corrosion resistant tinned copper wire

• Marinco 110 volt / 30 amp shore power cord and deck fitting.

• 50’ Marinco 30 Amp shore power cord

• Ten 110 volt electrical outlets

• Blue Seas E Series on/off/combine switch for house and engine batteries

• House battery bank system includes four 8D (200 amp hours each) deep cycle batteries

• Balmar Duocharge for automatic house and engine battery segregation.

• Xantrex Prosign 2.0 Inverter/charger with remote panel

• Group 27 engine starting battery

• Custom backlit electrical panel with AC/DC amperage and voltage display, battery monitor,

• Link 10 house battery monitor

• Electrical panel hinged for easy access

• 12V utility plugs at chart table, helm, forward locker

• Copper ground strap glassed to hull at waterline for SSB ground plane

• Wiring led clear of bilge where possible

​

Lighting

• Aquasignal Series 32 LED Bow, Stern, Anchor lights

• Aquasignal Steaming and Deck light combo

• Imtra LED white/red dome style interior lighting

• Courtesy/safety lighting throughout the cabin sole

• Individual LED reading lamps in each cabin

• Task lighting in engine compartment, lazarette, and forward sail/chain locker

• Automatic locker lights in hanging and pantry lockers

​

Plumbing

• 200 gallon fresh water capacity in two tanks located under the cabin sole, over the keel

• 11 gallon Isotherm stainless steel hot water heater

• 12 volt fresh water pump with accumulator tank

• Saltwater deck/anchor wash down pump, plumbed for fresh and sea water

• Rule 5 year 2000 electric bilge pump with float switch

• Helm mounted Whale Gusher 10 manual bilge pump

• Cabin mounted Whale Gusher 10 manual bilge pump

• Bronze flush mounted through hulls with sea cocks, labeled for easy identification

• Transom mounted hot and cold fresh water shower

• FRP holding tank (approximately 30 Gallons), gravity feed overboard discharge(aft head)

• FRP holding tank (approximately 20 Gallons), macerator pump for overboard discharge (fwd head)

• Deck discharge for both heads

• Tank Watch holding tank indicator (2)

• Sea Land Odor resistant hose used for all head plumbing

• Toilets plumbed for fresh and sea water

• Salt water manifold for Galley foot pump, aft head intake, generator, spare with strainer

​

Interior

Outbound Yachts offers its owners a unique opportunity to customize their interiors to a level that very few builders allow.

• Semi-raised salon design to provide long term liveaboard comfort

• 6’4” headroom

• Semi-custom designed interiors

• American Cherry interior – (teak option)

• Satin interior varnish, 5 coats

• Varnished Teak and Holly cabin sole

• Generous handholds throughout interior

• Positive locking floorboards

• Positive locking locker buttons

• Louvered doors and cabinet doors for ventilation

• Mobella door handles

• 10 Lewmar Ocean portlights

• 9 Lewmar Ocean hatches (6 size 00, 2 size 60’s, 1 size 65)

• 4 dorades with internal closures and deck plates

• Padded vinyl removable overhead panels with traditional teak/cherry trim throughout overhead

​

Saloon

• Semi-raised salon provides excellent natural lighting

• Dining table (drop down option)

• 7 foot rectangular dinette designed so outboard bench can be used as a sea berth

• 7 foot straight couch style settee (doubles as starboard midships sea berth)

• Fold down cocktail table in center of settee with bottle stowage outboard

• Ergonomically designed foam cushions with lumbar and thigh support

• Choice of Sunbrella fabric cushions

• Storage compartments accessed through hinged and positive locking doors behind settee and dinette backs

• Generous storage under dinette and settee

• Padded vinyl removable overhead panels with traditional teak/cherry trim throughout overhead

• Lewmar tinted acrylic Ocean hatch over table

• 4 LED reading lamps at each corner of settee and dinette

• Two Hella Fan

​

Galley

• U-Shaped galley for safe offshore use

• Corian counters with 2” fiddles featuring integral hand holds

• Three burner Force 10 propane stove with thermostatically controlled oven

• Polished stainless stove crash bar with welded eyes for cook’s safety belt

• Scanvik polished stainless steel double 8” deep sink

• Scanvik faucet assembly

• Jabsco salt water foot pump

• Jabsco fresh water foot pump

• 5 cubic foot icebox with minimum 4” foam insulation includes sliding tray

• Double opening icebox top, ready for separate refer/freezer compartments

• 5 drawers, sliding trash bin, tambour cabinet, and louvered lockers

• Large dedicated food pantry under counter

• Remote propane shutoff switch

• One Hella Fan

​

Navigation Station

• Forward facing chart table located adjacent to companionway for easy cockpit communication/watch standing

• Inset storage tray outboard of chart table for books, hand bearing compass, binoculars, etc

• Drawer unit including file drawer for ships papers

• Instrument box located forward and above chart table surface

• Hinged custom electrical panel for ease of access

• AC and DC volt and amp meters, battery monitor, and auto bilge pump switch custom built into panel

• Link 10 (Xantrex) battery monitor for house bank

• Aquasignal chart lights (2 – one red, one white)

• One Hella Fan

​

Forward Cabin

• Pullman Double or Centerline Double berths available (see interior plan options)

• Large hanging locker

• Drawer storage under bunk

• 5” foam mattress

• Sliding storage lockers above bunk

• LED reading lamps over bunk

• One Lewmar 60 Ocean hatch

• Dorade with inside closure

• 5 Opening ports

• Two Hella Fans

​

Forward Heads

• Fiberglass molded shower

• Corian counters

• Scandvik faucet

• Scandvik bulkhead mounted Hand-held shower

• Scandvik Stainless steel sink

• Raritan PHII head with overboard/holding tank plumbed for fresh and sea water

• Dorade with inside closure (centerline double only)

​

Aft Cabin

• 45” wide quarter berth, 5” foam mattress

• 2 drawers under bunk.

• Hanging locker and 4 shelf locker

• Sliding storage lockers over bunk

• Open stowage shelf for personal items at head of bunk

• Three opening ports

• One Lewmar Ocean hatch

• Two LED reading lamps

• One Imtra Red/White LED Dome light

• One Hella Fan

​

Aft Heads

• Seamless fiberglass construction from cabin sole to counter for easy cleaning

• Polished Corian counter tops with Corian fiddle.

• Large molded stall shower with molded seat and shower

• Large stainless steel sink

• Scandik faucet

• Raritan PHII head with overboard/holding tank, plumbed for fresh and sea water

​

Companionway

• No bridgedeck design for easy access to and from cockpit and cabin

• Three acrylic storm drop boards

• Hinged cabin doors with key lock – removable for sailing

• Three step, 19” wide companionway for easy and safe access to cabin

• Dust trap at base of companionway with teak grate